Carrier EDGE PRO 33CS2PPRH-01 User Manual download pdf

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Catalog No. 04-53330011-01 Printed in U.S.A. Form 33CS-20SO Pg 1 7-08 Replaces: New

Owner’s Manual

Part Numbers 33CS2PPRH-01 and 33CS2PP2S-01

SAFETY CONSIDERATIONS

Read and follow manufacturer instructions carefully. Fol-

low all local electrical codes during installation. All wiring

must conform to local and national electrical codes. Improper

wiring or installation may damage thermostat.

Recognize safety information. This is the safety alert sym-

bol . When the safety alert symbol is present on equipment

or in the instruction manual, be alert to the potential for person-

al injury.

Understand the signal words DANGER, WARNING, and

CAUTION. These words are used with the safety alert symbol.

DANGER identifies the most serious hazards which will result

in severe personal injury or death. WARNING signifies a haz-

ard which could result in personal injury or death. CAUTION

is used to identify unsafe practices which would result in minor

personal injury or property damage.

GENERAL

The Edge Pro thermostat by Carrier is a wall-mounted, low-

voltage control which combines temperature and humidity

control in either a single or two-piece unit. The Edge Pro ther-

mostat can be set for 7-day, 5/2-day, or 1-day programmable

operation. Different heating and cooling set points and times

are programmable for 2 or 4 periods per day. The thermostat

can also be configured for non-programmable operation. When

operating as a non-programmable thermostat, the user will still

have both temperature and humidity control.

The Edge Pro thermostat has no need for batteries to store

user-configured settings in memory. During power loss its in-

ternal memory saves settings for unlimited time, and the clock

continues to run for at least 24 hours. An extension of Carrier’s

proven line of thermostats, the Edge Pro thermostat provides

separate set points for heating and cooling in addition to hu-

midification and dehumidification.

OPERATION

Thermostat Display —

The thermostat display is locat-

ed in the center of the thermostat. See Fig. 1. The following

information can be displayed on the screen:

• day of the week

• programming option (indicates which settings are being

adjusted)

• filter and UV lamp service reminders

• current temperature

• current program routine (follow scheduled program-

ming, hold current settings, or run holiday program)

• fan mode (on, auto)

• current system mode (heating, cooling, emergency heat,

heat/cool (auto), off)

• humidify or dehumidify settings

• Fahrenheit or Celsius display

• advanced programming indicators

• keypad locked or unlocked

• programming option (indicates which settings are being

adjusted)

• system is in auxiliary (supplemental) mode

• cooling set point

• heating set point

• year

• holiday schedule return date

•day

• length of time for temporary temperature hold (override)

• month

• outdoor temperature

• leaving air temperature

• time period start

• period of the day

Thermostat Front Panel Buttons — The thermo-

stat has buttons under the front cover which are used for vari-

ous functions such as raising or lowering the desired set point

and changing the current mode. See Fig. 2.

SET BUTTON — This button enters the thermostat program-

ming schedule and allows the user to adjust the clock and

change the calendar.

SCHEDULE BUTTON — This button allows the user to

choose to follow a schedule, hold the current set points, or go

into holiday mode.

OCCUPIED BUTTON — This button temporarily changes

the thermostat from Unoccupied to Occupied settings.

MODE BUTTON — This button selects whether the thermo-

stat is set for heating, cooling, emergency heat, auto (heat and

cool as needed), or off modes.

DONE BUTTON — This button saves the settings when

completing a setup or programming step.

EDGE

Pro

33CS

Commercial Thermostat

holiday

occ

unocc

occ3

occ2

Fig. 1 — Thermostat Display

a33-9188

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Owner’s Manual

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.Cata

Page 2 - Points —

2UP BUTTON — This button is used to increment the current-ly chosen value (temperature, clock, calendar, etc.).DOWN BUTTON — This button is used to de

Page 3

33. The arrow will be pointing to “occ” on the screen. To setthe occ period start time, press the soft button under thehour or minute indictor and the

Page 4

4around the date. To set the date (D), press the up buttonand stop on the desired date.3. If the month (M) needs to be changed, press the soft but-ton

Page 5

55. Press the done button.6. Close the thermostat door.BACKLIGHTING — The thermostat may feature a low levelamount of backlighting until a button is p

Page 6 - TROUBLESHOOTING

6means, for example, that if the unocc period temperature set-ting is lower than the period that precedes it, then the thermo-stat will start cooling

Page 7

Page 8

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.Cata

Related models: EDGE PRO 33CS2PP2S-01

Comments to this Manuals

No comments

Carrier EDGE PRO 33CS2PPRH-01 User Manual

Browse online or download User Manual for Control panel Carrier EDGE PRO 33CS2PPRH-01. Carrier EDGE PRO 33CS2PPRH-01 User Manual

Summary of Contents

Related models: EDGE PRO 33CS2PP2S-01

Comments to this Manuals

Related products and manuals for Control panel Carrier EDGE PRO 33CS2PPRH-01