Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.Cata
10Air Filters — Remove and clean the air filters once amonth.NOTE: If air filters show signs of excessive wear or are torn,they must be replaced. Cont
11Table 3 — Troubleshooting LEGENDTable 4 — Unit Protection DevicesFill out the following to save time on any future service calls
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.Carr
2GENERALThe high wall fan coil unit provides quiet, maximumcomfort. In addition to cooling and/or heating, the high wallfan coil unit matched with an
3 The remote control can perform the following functions:• Turn the system ON and OFF• Select operating mode• Adjust room air temperature set point an
4SETTING THE TIME ON THE REMOTE CONTROL(Current Time Adjusting C and Reset Buttons) — Press cur-rent time adjusting button C to adjust the current ti
5Table 1 — Louver PositionsIndoor Unit Display (Fig. 7) — The indoor unit dis-play has three LED indicators at the lower right hand portion ofthe unit
6Selecting an Operating Mode — Use the button to select the unit operating mode.Repeatedly press the Operating Mode button to select avail-able modes.
7LEFT AND RIGHT CONTROL — To adjust the direction ofthe discharge air to the left or right, adjust the vertical guidevane with the handle after openin
85. Fan speed:Choose the fan speed, using . When the selection hasbeen completed, press button for confirmation. Thefan speed icon will stop flashi
9Using the Ionizer Function — The ionizerhelps to eliminate odors in the conditioned space.1. Press to activate the Ionizerfunction.2. Press again
Comments to this Manuals