Carrier 48/50Z030-105 Operations Instructions download pdf

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Catalog No. 04-53480066-01 Printed in U.S.A. Form 48/50-75SI Pg 1 8-09 Replaces: 48/50A,Z-2SI

Installation and Operating Instructions

Part Number CRSTATUS002A00

PACKAGE USAGE AND CONTENTS

SAFETY CONSIDERATIONS

Installation and servicing of air-conditioning equipment can

be hazardous due to system pressure and electrical compo-

nents. Only trained and qualified service personnel should

install, repair, or service air-conditioning equipment.

Untrained personnel can perform the basic maintenance

functions of replacing filters. All other operations should be

performed by trained service personnel. When working on

air-conditioning equipment, observe precautions in the litera-

ture, tags and labels attached to the unit, and other safety

precautions that may apply.

INSTALLATION

NOTE: The plugged filter indicator can monitor filter status

(CLEAN/DIRTY). Follow the procedures below and perform

the steps necessary to install the plugged filter indicator.

48/50A Units

1. Open the blower access door on the unit.

2. Open the filter section access door on the unit.

3. Mount the filter switch to the right of the auxiliary

control box (see Fig. 1) using two no. 6 screws.

4. Connect control tubes as shown in Fig. 1. Remove plug

bottoms, insert grommets and route tube through wall as

shown in Fig. 2. See Fig. 3 for dimensions.

5. Make electrical connections:

a. Orange wire marked PF-1 to terminal 1 on switch.

b. Brown wire marked PF-3 to terminal 3 on switch.

ITEM DESCRIPTION QTY PART NUMBER

UNIT

48/50

1 Switch 1 HK06WC029 A,P,Z

— Screw — 8-18x

in. 2 — —

— Screw — 6-20x

in. 2 — A

2 Control Tube 2 50TG501183 A

— Wire Tie 1 — —

3 Tube Fitting 1 KA70PP010 —

4 Hex Nut — #10-32 Brass 1 AT39QA131 —

5 Wire Tie 12 HY76TB045 P,Z

6 Tube Bracket 2 50DW503955 P,Z

7 Grommet 2 KA56GR140 A,P,Z

8 Control Tube 1 50NP500026 P,Z

9 Control Tube 1 50DW503993 P,Z

10 Bushing 1 HY93NH028 P,Z

11 Screw 2 AL48AM307 P,Z

WARNING

Prior to installation of this accessory, make sure all power

is disconnected to the unit and locked out. Failure to dis-

connect power supply prior to servicing may result in seri-

ous injury.

CAUTION

When removing panels from the unit, be careful not to

damage the roof or other surfaces with the panels.

48/50A020-060, 48/50P030-100,

48/50Z030-105

Plugged Filter Indicator Accessory

GROMMET

CONTROL

TUBE

FILTER INDICATOR SWTICH

LABELED PF-3

LABELED PF-1

GROMMET

CONTROL TUBE: 2" MIN LENGTH

INSERTED PAST FILTER ACCESS BAFFLE

Fig. 1 — Control Tube Routing (48/50A020-060)

Fig. 2 — Control Tube and Grommet

(48/50A020-060)

1 2 3 4

Summary of Contents

Page 1 - 48/50Z030-105

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.Cata

Page 2 - OPERATION

248/50P and 48/50Z Units1. Open the filter section access doors and panels to gainaccess. For sizes 030-050, also open the power exhaustsection doors

Page 3 - ITEM 8 AND 9

3ITEM 5ITEM6 + 11ITEM 8ITEM 6 + 11ITEM 925(0.98)ITEM 7ITEM 6ITEM 8 AND 9BPDPOACFMTRANSDUCERFILTERSWITCH(ITEM 1)DUCTPRESSURETRANSDUCEROUTDOOR CFMSENSOR

Page 4 - TRANSDUCER

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.Cata