Carrier Edge TP-PRH Owner's Manual download pdf (Page 16)

Operating the Thermostat

Setting the home temperature

1. Open the door.

2. Press the

home button located under the display on

the left. You will see a triangle icon ( ) above the

home

button. This icon will always tell you whether you’re in

the home, away or sleep setting.

3. You will see the heating and cooling temperatures that

were set at the factory. To use these, just close the door.

4. To change the heating setting, press the

mode button

on the left until you see the word

heat on the screen

on the left.

5. Press the

up or down button until you reach the desired

temperature setting. The arrow pointing to the home

button will disappear.

6. Press and hold the

home button for about three seconds. The home

arrow will be displayed, indicating that the thermostat has saved

your settings.

7. To change the cooling temperature setting, press the

mode button

repeatedly until you see the word

cool on the screen on the right.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 46 47

No comments

Carrier Edge TP-PRH Owner's Manual Page 16