Carrier Supra 650 Operations Instructions download pdf (Page 16)

62-61107-02

CD10 BATT Battery voltage

CD11 SBY Standby (electric motor) hours

CD12 MOD V Future expansion

CD13 REV Software revision

CD14 SERL Serial number low

CD15 SERU Serial number upper

CD16 2RA Compartment 2 – return air temperature

CD17 3RA Compartment 3 – return air temperature

CD18 MHR1 Maintenance hour meter 1

CD19 MHR2 Maintenance hour meter 2

CD20 SON Switch on hour meter

*SAS and REM are options. SAS is displayed when the SUP PROBE function is

selected. REM is displayed when the REM PROBE function is selected.

7.8. To change a function

1. Press the FUNCTION CHANGE key (3.) until the function you want to change appears on the

display.

2. Press the ENTER key (17.).

3. Press the UP or DOWN ARROW key (2.) until the function setting you want appears on the

display.

4. Press the ENTER key (17.) to validate new setting.

FUNCTION PARAMETERS

CODE ENGLISH AVAILABLE SELECTIONS

FN0 DEFR Defrost interval 1.5, 3, 6 or 12hr

FN1 ON CITY SPEED Low speed only

FN1 OFF HIGH SPEED Low and high speed

FN2 OFF T Minimum Off-time 10, 20, 30, 45 or 90mn

FN3 ON T On-time 4 or 7 mn

FN4A REM PROBE

FN4B SUP PROBE

Controlling probe

FN5 F/C DEGREES F/C Standard unit selected (default C)

FN6 ON TIME STRT

FN6 OFF TEMP STRT

Maximum Off time

FN7 0 MOP SDT

FN7 -5 MOP -

FN7 +4 MOP +

Mop selection

FN10 ON AUTO OP

FN10 OFF MAN OP

Start mode

FN11 T RANGE Out of range (A=2°C / B=3°C / C=4°C)

CODES / ENGLISH Code or english display format

NORM / ADD GLOW Manual glow override. Normal of add 30 seconds

ALARM RST / CLR

Alarm RST = Alarm reset required

Alarm CLR = No alarm active

Selection in bold are factory settings.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Carrier Supra 650 Operations Instructions Page 16

Comments to this Manuals

Related products and manuals for Unknown Carrier Supra 650