Carrier 06E Specifications download pdf (Page 36)

REASSEMBLY

1. If reassembling existing components, do not interchange

valves or turn them over.

They must be reassembled in

their original position. Install the suction valve posi-

tioning springs (06CC size 16 to 37 Cfm and 06D

compressors only) on dowel pins. Assemble positioning

springs with spring ends bearing against cylinder deck

(Fig. 4), spring bow upward.

2. Install suction valve on dowel pins as follows:

a. 06D compressors: install suction valves on top of

positioning springs as mentioned in Step 1 above.

b. 06E compressors: if compressor uses a suction

valve and a backer valve (looks like a 1/2 a suction

valve), backer valve must be installed before

installing full size suction valve (Fig. 5).

Fig. 5 –– Piston, Suction Valve, and Backer

Positions (06E)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 123 124

No comments

Carrier 06E Specifications Page 36