2
BRYANT MODEL USAGE
MODEL NO. REF TONS
GRILLE PKG
PART NO.
COOLING
569J---07A
6 CAGRILLE006A00
569J---08A
7.5 CAGRILLE007A00
569J---12A
569J---12D
576J---12A
576J---12D
10 CAGRILLE008A00
569J---14A
569J---14D
576J---14A
576J---14D
12.5 CAGRILLE009A00
HEATING
575J---07
6 CAGRILLE010A00
575J---08
7.5 CAGRILLE011A00
575J---12
10 CAGRILLE015A00
PACKAGE CONTENTS AND
PANEL USE LOCATION
GRILLE PKG
PART NO.
PACKAGE
CONTENTS
PANEL USE
LOCATION
CAGRILLE006A00
(2) Wire Grilles: --- --- --- ---
(1) --- 37.0 x 33.1 LEFT SIDE
(1) --- 37.0 x 41.4 BACK
(6) #10 x 5/8 Screws --- --- --- ---
CAGRILLE007A00
(2) Wire Grilles: --- --- --- ---
(1) --- 37.0 x 45.0 LEFT SIDE
(1) --- 37.0 x 41.4 BACK
(6) #10 x 5/8 Screws --- --- --- ---
CAGRILLE008A00
(2) Wire Grilles: --- --- --- ---
(1) --- 45.0 x 46.0 LEFT SIDE
(1) --- 45.0 x 41.4 BACK
(6) #10 x 5/8 Screws --- --- --- ---
CAGRILLE009A00
(3) Wire Grilles: --- --- --- ---
(1) --- 45.0 x 46.0 LEFT SIDE
(1) --- 45.0 x 41.4 BACK
(1) --- 45.0 x 26.4 RIGHT SIDE
(8) #10 x 5/8 Screws --- --- --- ---
CAGRILLE010A00
(2) Wire Grilles: --- --- --- ---
(1) --- 37.0 x 29.1 LEFT SIDE
(1) --- 37.0 x 41.4 BACK
(6) #10 x 5/8 Screws --- --- --- ---
CAGRILLE011A00
(3) Wire Grilles: --- --- --- ---
(1) --- 37.0 x 29.1 LEFT SIDE
(1) --- 37.0 x 41.4 BACK
(1) --- 37.0 x 26.3 RIGHT SIDE
(8) #10 x 5/8 Screws --- --- --- ---
CAGRILLE015A00
(3) Wire Grilles: --- --- --- ---
(1) --- 45.0 x 29.1 LEFT SIDE
(1) --- 45.0 x 41.4 BACK
(1) --- 45.0 x 26.4 RIGHT SIDE
(8) #10 x 5/8 Screws --- --- --- ---
GENERAL
The accessory condenser coil grille is used for protection
of the condenser coil. See Tables for usage and package
contents.
IMPORTANT: Never use screws through the top cover to
secure grilles. Coil damage could occur.
C10294
INSTALLATION
1. Remove outdoor coil grilles from their protective
packaging. The 6, 7--1/2 and 10 ton condensing unit
accessories contain 2 grilles while the 12--1/2 ton
condensing unit accessory contains 3 grilles. The 6
ton heat pump unit accessories contain 2 grilles,
while the 7--1/2 and 10 ton heat pump unit accessor-
ies contain 3 grilles.
2. Insert the hooks at the top of the grille (See Fig. 2)
into the holes provided on the top cover of the unit.
SeeFig.1–6forlocations,dependingonthegrille
currently being attached.
3. Attach the bottom of the grille by checking to see
which of the screws in the unit’s base pan align with
the bottom of the grille. (The basepan is located at
the base of the unit and folds over the base rails.)
Remove the screws that align with the bottom of the
grille.
4. Secure the grille by using the screws removed in
Step 3 to attach the bottom of the grille to the base
pan in those positions. See Fig. 1 -- 6 for locations,
depending on the grille currently being attached.
NOTE: If there is no screw in the base pan, in the
position that aligns with the bottom of the grille, use the
screws included with the accessory.
5. Repeat Steps 2, 3 and 4 for the remaining grille(s).
(36 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals