Carrier 38APS025-065 Specifications download pdf

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Catalog No. 04-53300114-01 Printed in U.S.A. Form 30/38-13SI Pg 1 6-13 Replaces: 30RAP-4SI

Installation Instructions

Part No. 30RA-900---058, 30RA-900---059

SAFETY CONSIDERATIONS

Installation of this accessory can be hazardous due to sys-

tem pressures, electrical components, and equipment location

(such as a roof or elevated structure).

Only trained, qualified installers and service mechanics

should install and service this equipment.

When installing this accessory, observe precautions in the

literature, labels attached to the equipment, and other safety

precautions that apply.

• Follow all safety codes.

• Wear safety glasses and work gloves.

• Use care when handling and installing this accessory.

GENERAL

The ground-fault circuit interrupter convenience outlet

(GFI-CO) accessory provides two auxiliary 115 v, 60 Hz out-

lets for portable computers, lights, small hand tools and other

devices. The current output is limited to 4 amps. See Table 1

for specific package applications.

Table 1 — Accessory Package Usage

Check each item for shipping damage. If any damage is

found, file a claim with the shipping agent immediately. If any

item is missing or if any part does not assemble properly, notify

your Carrier representative. Table 2 lists the contents of the

accessory kits.

Table 2 — Package Contents

INSTALLATION

Sizes 30RAP010-030, 38APS,APD025-030

1. Open and tag all electrical disconnects.

2. Open the unit control box door.

3. Locate the bag of screws and fuses (30RA-900---058

only) supplied with the accessory.

4. Remove transformer box cover. Save screws.

5. Verify correct primary connections are made.

NOTE: The 30RA-900---059 kits are shipped with cor-

rect wiring for 575 v. The 30RA-900---058 kits are

shipped with correct wiring for 460 v. Operation at 208/

230 v WILL

require a wiring change and change of pri-

mary fuses to FNQ-R-3

. See Table 3. Rejection type

fuses are installed one way only. Make sure they are se-

cure in the fuse holder clips.

Table 3 — Primary Connections

WARNING

Electrical shock can cause personal injury and death. Shut

off all power to this equipment during installation. There

may be more than one disconnect switch. Tag all discon-

nect locations to alert others not to restore power until work

is completed.

UNIT PACKAGE REQUIRED

30RAP010-150, 38APS025-065,

38APD025-130

(208/230, 230, 460 V)

30RA-900---058

30RAP010-150, 38APS025-065,

38APD025-130 (575 V)

30RA-900---059

ACCESSORY

PART NO.

DESCRIPTION QTY

30RA-900---058

Transformer/Convenience Outlet Assem-

bly Assembly, 38APFSCLG--600

Screws,

-in.

-in. long 4

230v: Primary fuse FNQ-R-3

(FU5 and

FU6)

460v: Primary fuse FNQ-R-2

(FU5 and

FU6)

Secondary fuse FNM-6 (FU4) 1

Wire Ties 4

30RA-900---059

Transformer/Convenience Outlet Assem-

bly Assembly, 38APFSCLG--100

Screws,

-in.

-in. long 4

Primary fuse FNQ-R-2

(FU5 and FU6) 2

Secondary fuse FNM-6 (FU4) 1

Wire Ties 4

WARNING

Before beginning installation of this equipment, be sure all

power to the unit is disconnected, and that tags are properly

placed to alert others. Electrical shock can cause personal

injury and death.

VOLTAGE PRIMARY CONNECTIONS

575 V H1, H2

460 V H1, H4

230 V H2, H4

208 V H3, H4

30RAP010-150, 38APS025-065, 38APD025-130

Ground-Fault Interrupter

Convenience Outlet Accessory

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Installation Instructions

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.Cata

Page 2 - CONVENIENCE

26. Install the GFI-CO accessory box in the location shownin Fig. 1. Use the included sheet metal screws to fastenbox to the basepan.7. Using the scre

Page 3 - FIOP/ACCESSORY

39. In the control box, attach the black wire labeled 1 to the11 connection on the A1 compressor contactor. Attach theblack wire labeled 2 to the 12 c

Page 4

4Sizes 30RAP035-060, 38APS040,050, 38APD040-0601. Open and tag all electrical disconnects.2. Open the unit right control box door and remove innercove

Page 5

5CONVENIENCEOUTLETFig. 6 — Accessory Convenience Outlet Wire Routing — 30RAP035-060 (Shown),38APS040,050, 38APD040-060 UnitsFig. 7 — Accessory Conveni

Page 6

6Sizes 30RAP070-150, 38APS065,38APD070-1301. Open and tag all electrical disconnects.2. Open the unit middle control box door and remove innercover.3.

Page 7 - B2 OR B3

7B2 OR B3Fig. 9 — Accessory Convenience Outlet Control Box Wiring — 30RAP070-150, 38APS065, 38APD070-130 Units

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.Cata