Carrier TST-EEPD06121SCS01 User Manual download pdf

1/2

PROGRAMMABLE

DIGITAL THERMOSTAT

TST-EEPC06111SCS00 / TST-EEPD06111SCS01

TST-EEPC06121SCS00 / TST-EEPD06121SCS01

-7 Day Programmable

-Cool、Heat and Ventilation

-Large, Easy To Read Display

-Blue Backlight

-Fahrenheit or Centigrade

Specification

Set-Point Range: 5℃-35℃(41℉-95℉)

Operating difference: ± 1℃

Switch current rating: < 2A

Sensing element : NTC

Display: LCD

Power supply:

TST-EEPC06111SCS00: AC85V~220V 50Hz/60Hz

TST-EEPD06111SCS01: AC85V~220V 50Hz/60Hz

TST-EEPC06121SCS00: AC24V ±10% 50Hz/60Hz

TST-EFPD06121SCS01: AC24V ±10% 50Hz/60Hz

Dimensions: 86 × 86 × 29.5 mm(W×H×D)

Housing: ABS Flame Retardant

Basic Operation

Power ON/OFF

 To turn the thermostat on, press “ ”. Mode symbol ( , or ),

“RT”, and room temperature will be displayed.

 To turn the thermostat off, press “ ” again. There is no any display on

LCD and no any output.

Select Mode:

 Cool Setting:Press “M”, until the “ ” is displayed, it will be confirmed

automatically after 6 seconds.

 Heat Setting:Press “M”, until the “ ” is displayed, it will be confirmed

automatically after 6 seconds.

 Ventilation Setting:Press “M”, until the “ ” is displayed, it will be

confirmed automatically after 6 seconds.

Fan Setting:

 Fan speed select: press the fan button to select “ （Hi）、（Med）、

（Low）、（Auto）”. In mode“ （Auto）”, the fan-speed changed

automatically. Auto LOW-speed When the difference between

room-temperature and setting-temperature exceed 1℃(2℉), Auto

MED-speed When exceed 2℃(4℉), Auto HI-speed When exceed 3℃(6

℉).

Select Current Stage Temperature

TST-EEPC06111SCS00 / TST-EEPC06121SCS00:

 Press”5” or ”6” until the desired temperature set point is displayed.

TST-EEPD06111SCS01 / TST-EEPD06121SCS01:

Press ”5” or ”6” until the desired heating or cooling temperature set

point is displayed.

Press the MODE button to select the second temperature setting(either

HEAT or COOL)

Set Current Time

Press the clock button. The hour of the time will flashing. Press the “5”

and “6” buttons until the correct time is shown. Press the clock button

once,the minute of the time will flashing. Press the “5” and “6” buttons

until the correct time is shown. Press the clock button once,the day will

flashing. Press the “5” and “6” buttons to the day.

Error Codes

TST-EEPC06111SCS00 / TST-EEPC06121SCS00:

E1 — If the thermostat cannot properly read room temperature, and it

needs to be adjusted, E1 will be displayed.

TST-EEPD06111SCS01 / TST-EEPD06121SCS01:

E2 — If the thermostat cannot properly read outdoor temperature, and it

needs to be adjusted, E2 will be displayed.

Set Thermostat Configuration

Configuration options are intended to be selected at installation and

normally should not be modified by the home owner. These options are

not discussed in the Homeowner’s Guide and therefore must be made

as part of the installation. A special procedure allows entry in to the

configuration mode. The thermostat will automatically exit this if no

button is pressed for 90seconds.

An explanation for each of these and how to enter the configuration

mode follows.

To enter the configuration mode:

To enter the configuration mode, hold the fan button down for

approximately 15 seconds. After 15 the second periof,Option”01” will

appear in the display.

OPTION 01 –LOW TEMPERATURE PROTECTION (FROST

PROTECTION)

In the low temperature protection mode, When the thermostat is off , and

the room temperature is lower than 5℃, it will be turned on automatically

and in heating mode; When the room temperature is higher than 7℃, it

will be turned off automatically.

TO ADJUST:

Enter configuration mode (if not already there).

Use “5” and “6” buttons to display Option 01.The SET icon should be

off.

Press” M ” button once. The SET icon will be come on. The display now

shows Option 01 setting.

Use “5” and “6” buttons to move between the available Option 01

choices of 00(disable) or 01(enable). Factory default is 00.

Press” M ” button again to return to Option 01. The SET icon will now be

off.

Use “5” and “6” buttons to select another Option, or press” “button

to exit configuration mode.

OPTION 02 –FAHRENHEIT/CELSIUS SELECTION

This option selects Fahrenheit or Celsius operation.

TO ADJUST:

Enter configuration mode (if not already there).

Use “5” and “6” buttons to display Option 02.The SET icon should be

off.

Press” M ”button once. The SET icon will be come on. The display now

shows Option 02 setting.

Use “5” and “6” buttons to move between the available Option 02

choices of F (Fahrenheit) or C (Celsius). Factory default is C.

Press” M ”button again to return to Option 02. The SET icon will now be

off.

Use “5” and “6” buttons to select another Option, or press “ “button

to exit configuration mode.

OPTION 3－ROOM TEMPERATURE OFFSET

This option allows calibration (or deliberate miscalibration) of room

temperature sensor. There are various reasons why the home owners

want to adjust the displayed temperature. The selected number is the

number of degrees, plus or minus, which will be added to the actual

temperature. The number can range between -5 and +5. Factory default

is 0. This adjusted value will be used as actual temperature for both

display and control action.For example, if 2 is selected, 72F actual will

read 74F. If setpoint is 72, the room will control to an actual value of 70

which will be displayed and acted upon as if it were 72. The effect is that

a positive number selection will make the room temperature lower and

vice versa. This thermostat is factory calibrated within an accuracy of

plus or minus 1F, so this adjustment will provide the best accuracy when

set to 0.

TO ADJUST:

Enter configuration mode(if not already there).

Use “5” and “6” buttons to display Option 03.The SET icon should be

off.

Press” M ”button once. The SET icon will be come on. The display now

shows Option 03 setting.

Use “5” and “6” buttons to move between the available Option 01

choices of -5 through +5 in 1 step. Factory default is 0.

Press” M ”button again to return to Option 03. The SET icon will now be

off.

Use “5” and “6” buttons to select another Option, or press “ “button

to exit configuration mode.

OPTION 04 –SAVE CONFIGURATION DATA

This option can be used to choose Save configuration data

TO ADJUST：

Enter configuration mode (if required).

Use up and down buttons to display Option 04.The SET icon should be

off.

Press” M ” button once. The SET icon will come on. The display now

shows Option 04 setting.

Use “5” and “6” buttons to move between the available Option 04

choices of 00(disable) or 01(enable). Factory default is 01.

Press ” M” button again to return to Option 04. The SET icon will now be

off.

Use “5” and “6” buttons to select another Option, or press “

“button

to exit configuration mode.

Programming Thermostat Schedules

Before programming the thermostat, plan the thermostat daily schedule. The

schedule is divided into 7 days (Monday through Sunday). Each day has 4

time periods (1,2, 3, 4). Each time period has a start time, heating

set point, and cooling set pointFill in Table 1 as an aid to programming

the daily schedules.

NOTE: TST-EEPC06111SCS00 / TST-EEPC06121SCS00has single

temperature set point.

To program the daily schedules,perform the following procedure:

1. Enter programming mode by hold the clock button down for 5 seconds.

“Wen” and ”--:--” will be displayed. Use “5” and “6” buttons to select the day

of the schedule. Press The clock button TIME annunciator will flash.

NOTE: If a programming button is not pushed for 90 seconds, the

thermostat will exit programming mode.

2. Press the “5” and “6” buttons to set the start time for the schedule day

and period shown.

3. Press the clock button once, The heating set point and the

heat

annunciator will be displayed. Press the “5” and “6” buttons to set heating

set point.

4. Press the clock button once, The cooling set point and the cool

annunciator will be displayed. Press the “5” and “6” buttons to set cooling

set point.

5. Press the clock button to advance to the next time period.

Perform Steps 2 through 5 until the times and temperature set points have

been entered for the entire day. Press the clock button and display”copy”,use

“5” and “6” buttons to select the day for copy, press the clock button to

confirm.

Repeat Steps 2 through 6 to program the remaining schedule days.

SCHEDULE

1 2 3 4

DAY OF

WEEK

Tim/Heat/Cool Tim/Heat/Cool Tim/Heat/Cool Tim/Heat/Cool

Monday / / / / / / / / / / / /

Tuesday / / / / / / / / / / / /

Wednesday / / / / / / / / / / / /

Thursday / / / / / / / / / / / /

Friday / / / / / / / / / / / /

Saturday / / / / / / / / / / / /

Sunday / / / / / / / / / / / /

TST-EEPC06111SCS00/ TST-EEPC06121SCS00:

TST-EEPD06111SCS01/ TST-EEPD06121SCS01:

Table 1 Daily Schedule Planner

Power button

Mode button Fan button Down button Up button

Shows room temperature,

desired temperature, and

other feature information

as required.

Room temperature

Set

desired temperature

Change mode

Cool mode

Heat mode

Fan indicator

SET

Clock button

Current Time

Ventilation mode

Wire Diagram

L(R)

Val

Low

Med

N(C)

L(R)

Val

Low

Med

N(C)

Thermostat

Fan coil

L(R)

Val

Low

Med

N(C)

OUTDOOR SENSOR

CONNECTION

L(R)

Val

Low

Med

N(C)

1 2

DIGITAL THERMOSTAT 1

Summary of Contents

Page 1 - DIGITAL THERMOSTAT

1/2 PROGRAMMABLE DIGITAL THERMOSTAT TST-EEPC06111SCS00 / TST-EEPD06111SCS01 TST-EEPC06121SCS00 / TST-EEPD06121SCS01 -7 Day Programmable -C

Page 2

2/2 Installation: Thermostat Location Thermostat should be mounted: • Approximately 5 ft (1.5m) from floor. • Close to or in a frequently used room,

Comments to this Manuals

No comments

Carrier TST-EEPD06121SCS01 User Manual

Browse online or download User Manual for Thermostats Carrier TST-EEPD06121SCS01. DIGITAL THERMOSTAT

Summary of Contents

Comments to this Manuals

Related products and manuals for Thermostats Carrier TST-EEPD06121SCS01