Carrier 58DLA User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
8
Dimensions
58STA/STX
UNIT SIZE
A
(CABINET
WIDTH)
D
(SUPPLY
WIDTH)
E
(BOTTOM
RETURN WIDTH)
F
(TOP VENT
OUTLET)
VENT
CONNECTION
SIZE
(see notes 1 & 2)
045-08
14-3/16 12-9/16 12-11/16 9-5/16 4
045-12
14-3/16 12-9/16 12-11/16 9-5/16 4
070-08
14-3/16 12-9/16 12-11/16 9-5/16 4
070-12
14-3/16 12-9/16 12-11/16 9-5/16 4
070-16
17-1/2 15-7/8 16-1/8 11-9/16 4
090-14
17-1/2 15-7/8 16-1/8 11-9/16 4
090-16
21 19-3/8 19-1/2 13-5/16 4
090-20
21 19-3/8 19-1/2 13-5/16 4
110-12
17-1/2 15-7/8 16-1/8 11-9/16 4
110-16
21 19-3/8 19-1/2 13-51/6 4
110-22
21 19-3/8 19-1/2 13-5/16 4
135-16
21 19-3/8 19-1/2 13-5/16 4 (note 1)
135-22
24-1/2 22-7/8 23 15-1/16 4 (note 1)
155-20
24-1/2 22-7/8 23 15-1/16 4 (note 1)
1) 135 and 155 size furnaces require five-
inch vents. Use a 4-5 inch vent adapter be-
tween furnace and vent stack.
2) See Installation Instructions for complete
installation requirements.
A02021
NOTES: 1. Two additional 7/8-in. dia. knockouts are located in the top plate.
2. Minimum return-air openings at furnace, based on metal duct. If flex duct is used, see flex duct manufacturer’s
recommendations for equivalent diameters.
3. Minimum return-air opening at furnace.
a. For 800 CFM-16-in. round or 14-1/2 x 12-in. rectangle.
b. For 1200 CFM-20-in. round or 14-1/2 x 19-1/3 in. rectangle.
c. For 1600 CFM-22-in. round or 14-1/2 x 23-1/4-in. rectangle.
d. For airflow requirements above 1800 CFM, see Air Delivery table in Product Data literature for specific use of
single side inlets. The use of both side inlets, a combination of 1 side and the bottom, or the bottom of single side
inlets. The use of both side inlets, a combination of 1 side and the bottom, or the bottom only will ensure adequate
return air openings for airflow requirements above 1800 CFM.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments