Carrier Edge TP-PRH Owner's Manual download pdf (Page 20)

Operating the Thermostat

Setting the sleep temperature

1. Press the sleep button located under the display in

the center. You will see a triangle icon ( ) above the

sleep button.

2. You will see the heating and cooling temperatures that

were set at the factory. To use these, just close the

door.

3. To change the heating setting, press the

mode button

until you see the word

heat on the screen on the left.

4. Press the

up or down button on the right side of the

display until you reach the desired temperature setting.

The arrow pointing to the sleep button will disappear.

5. Press and hold the

sleep button for about three

seconds. The sleep arrow will be displayed, indicating

that the thermostat has saved your settings.

6. To change the cooling temperature setting, press the

mode button

repeatedly until you see the word

cool on the screen on the right.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 46 47

No comments

Carrier Edge TP-PRH Owner's Manual Page 20