Carrier CC425LL User Manual download pdf (Page 4)

POSITION

Place the appliance horizontally on a firm surface, resting on

all four wheels.

The room should be dry and adequately ventilated.

If the room temperature exceeds 32°C, or falls below 16°C,

the appliance will not function as it should.

Do not place the appliance close to sources of heat,

radiators, chimneys, etc., and do not place the appliance in

direct sunlight.

If the appliance has been handled standing on end it should

be allowed to stand in normal position for about 12 hours

before switching it on.

Please ensure that when the appliance is installed it is easily

accessible for the engineer in the event of a breakdown.

SSWWIITTCCHHIINNGG OONN

Before switching on, the appliance should be cleaned

inside. See under Maintenance.

INSTALLATION

EELLEECCTTRRIICCAALL RREEQQUUIIRREEMMEENNTTSS

Before switching on, make sure that the voltage of your

electricity supply is the same as that indicated on the rating

plate, located on the backside of the appliance.

WARNING:

This appliance must be earthed.

FITTING WHEELS

The wheels are fitted as shown in the drawing, using the

enclosed fitting key.

1 2 3 4 5 6 7 8

No comments

Carrier CC425LL User Manual Page 4