6
TEMPERATURE CONTROL
The thermostat ensures that the required temperature is
maintained in the appliance. Adjust the temperature by
turning the button with a coin that fits the groove. Turning
the thermostat button towards no. 7 makes the temperature
in the appliance colder, and turning the button towards no.
1 makes the temperature warmer.
The correct setting can be found by measuring the
temperature of the top package in the middle of the appliance.
This should not have a temperature lower than 0 °C.
The thermostat has been adjusted to the optimal position by
the manufacturer. Please do not adjust the thermostat
unless the temperature is lower than 0 °C.
HOW TO USE
IMPORTANT
1. Before adjusting the temperature please
disconnect the appliance from the electricity
supply and remove the plastic grid from the right
side of the appliance.
2. Adjust the required temperature.
3. Fit the plastic grid to the appliance.
4. Reconnect the appliance to the electricity.
It is possible that the compressor does not start
immediately after a short-time disconnection from
the electricity supply.
WARNING
Before fitting the plastic grid to the appliance you
must not reconnect the appliance to the electricity.
PACKAGING AND POSITIONING
Never fill the cooler to more than 5 mm below the top
edge.
LOCK
(Not a standard accessory for all models.) The appliance
can only be locked when the upper lid is pushed to the
left and the lower lid is pushed to the right. Insert the key
in the lock and turn. The key can be removed.
Remember to keep the key out of the reach of children.
BASKETS
(Not a standard accessory for all models.) The baskets
are designed for the storage of beverage. The handles
can be placed in two positions, as shown in the
drawings.The baskets can either be placed inside the
freezer or hung on the edge of the casing.
Comments to this Manuals