Carrier DELUXE 58DXC User Manual

Browse online or download User Manual for Kiln Carrier DELUXE 58DXC. Carrier DELUXE 58DXC User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
HEATING & COOLING
58DXC, 58SXC
Deluxe Gas-Fired Condensing Furnaces
Service and Maintenance instructions
For Sizes 040-100, Series 100
NOTE; Read the entire instruction manual before starting the
installation.
SAFETY CONSIDERATIONS
Installing and servicing heating equipment can be hazardous due to
gas and electrical components. Only trained and qualified person
nel should install, repair, or service heating equipment.
Untrained personnel can perform basic maintenance functions
such as cleaning and replacing air filters. All other operations must
be performed by traiiied^ervice personnel. When working on
heating equipment, observe precautions in the literature, tags, and
labels attached to or shipped with the unit and other safety
precautions that may apply.
Follow all safety codes, including NFPA 54/ANSI Z223.1-1988,
National Fuel Gas Code. Wear safety glasses and work gloves.
Have a fire extinguisher available during start-up and adjustment
procedures and service calls.
Recognize safety information. This is the safety-alert symbol ^ .
When you see this symbol on the unit and in instructions or
manuals, be alert to the potential for personal injury.
Understand the signal word—DANGER, WARNING, or CAU
TION. These words are used with the safety-alert symbol. DAN
GER identifies the most serious hazards which will result in severe
personal injurj> or death. WARNING signifies hazards that could
result in personal injury or death. CAUTION is used to identify
unsafe practices, which would result in minor personal injury or
product and property damage.
A
WARNING
The ability to properly perform maintenance on this equip
ment requires certain expertise, mechanical skills, tools, and
equipment. If you do not possess these, do not attempt to
perform any maintenance on this equipment other than those
procedures recommended in the User’s Manual. FAILURE
TO FOLLOW THIS WARNING COULD RESULT IN
POSSIBLE DAMAGE TO THIS EQUIPMENT, SERIOUS
PERSONAL INJURY, OR DEATH.
A WARNING
Never store anything on, near, or in contact with, the furnace,
such as;
1. Spray or aerosol cans, rags, brooms, dust mops, vacuum
cleaners, or other cleaning tools.
2. Soap powders, bleaches, waxes or other cleaning com
pounds, plastic or plastic containers, gasoline, kerosene,
cigarette lighter fluid, dry cleaning fluids, or other volatile
fluids.
3. Paint thinners and other painting compounds, paper bags or
other paper products.
Failure to follow this warning can cause corrosion of the heat
exchanger, fire, personal injury, or death.
Fig. 1—Model 58SXC Upflow Furnace
A91098
A91103
Fig. 2—Model 58DXC Downflow Furnace
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Book 1 4
Tab 6a 8a
PC 101 Catalog No. 535-832
Printed in U.S.A,
Form 58D,S-8SM
P0 1
7-92
Replaces: 58D,S-6SM
Page view 0
1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - 58DXC, 58SXC

HEATING & COOLING58DXC, 58SXC Deluxe Gas-Fired Condensing FurnacesService and Maintenance instructionsFor Sizes 040-100, Series 100NOTE; Read th

Page 2 - A CAUTION

Copyright 1992 CARRIER Corp. • 7310 W. Morris St. Indianapolis, IN 4623115063Manufacturer reserves the right to discontinue, or change at any time,

Page 3

CARE AND MAINTENANCEFor continuing high performance and to minimize possible equipment failure, it is essential that maintenance be performed

Page 4 - Tightness is very important

step 2—Blower Motor and Wheel MaintenanceFor long life, economy, and high efficiency clean accumulated dirt and grease from blower wheel and motor ann

Page 5 - BURNER FUME

b. Reinstall vent pipe enclosure.c. Reconnect red wires to auxiliary limit switch.20. Connect electrical leads to blower speed selector. Not

Page 6

(5.) Repeat procedures (above) until each furnace cell has been cleaned.(6.) Using vacuum cleaner, remove residue from each cell.' (7.) Using va

Page 7

13/32"-B1bIF\Xil—fl'Vaa"/' IGNITORASSEMBLYK/\Ig IGNITOR (g BURNERIGNITORASSEMBLYA91064Fig. 12—Position of Ignitor to Burner^8 ODPR

Page 8 - 317275-401 REV. B

__________FIELD 24-VOLT WIRING— —FIELD 115-, 208/230-, 460-VOLT WIRING FACTORY 24-VOLT WIRING FACTORY 115-, 208/230-, 460-VOLT WIRING115-VOLTSINGLEPHA

Page 9 - TROUBLESHOOTING GUIDE

REDGVROtpbCPUHUMRHUM-1 (TPYEL0_ROtP7W Y R C G0 0 0 0 024V AC0.5 AMP. MAX.PC8COMMONnCX>—IJW9 NOTE /8 SELF^ ^ ^ ^90 135 180 225 I® ^BLOWER OFF DELAY

Page 10

STARTTROUBLESHOOTING GUIDE HSI CONDENSING FURNACES

Related models: DELUXE 58SXC

Comments to this Manuals

No comments