Carrier 48TJD Specifications download pdf (Page 44)

Optional Hinged Access Doors --When the optional

service package is ordered or the if the hinged access doors

option is ordered, the unit will be provided with external and

internal hinged access dool_ to facilitate service.

Four external hinged access doors are provided. All extern;d

doors _ue provided with 2 large 1/4 turn latches with folding

bail-type handles. (Compressor access doors have one latch.) A

single door is provided for filter and drive access. One door is

provided for control box access. The control box access door is

interlocked with the non-fused disconnect which must be in the

OFF position to open the dool: Two doors are provided for ac-

cess to the compressor compartment.

Two internal access doors are provided inside the filter/

drive access dool: The filter access door (on the left) is secured

by 2 small 1/4 turn latches with folding bail-type handles. This

door must be opened prior to opening the drive access dool:

The &ive access door is shipped with 2 sheet metal screws

holding the door closed. Upon initial opening of the dooL these

screws may be removed and discarded. The door is then held

shut by the filter access door, which closes over it.

SEE

"C"

,@ •

@ @

48TJD016

@ @ @

,@ @

48TJD020-028 AND 48TJF016

o(_o

@ @

o_o

48TJ F020-028

SPARK GAP .120" TO .140"

1 _RK IAP .181"

DETAIL"C"

Fig. 57 -- Spark Gap Adjustment

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 55 56

No comments

Carrier 48TJD Specifications Page 44