Carrier Supra 650 Operations Instructions Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
62-61107-02
2. IDENTIFICATION
Keep the fold out sheet while reading the instructions.
1. Nameplate
Each unit is identified by a nameplate attached to the frame of the unit. The nameplate identifies the
complete model number of the unit, the serial number and some other information.
If a problem occurs, please refer to the information on this plate, and make a note of the model and
serial number before calling for assistance. This information will be needed when you contact a
technician so that he may properly assist you.
The complete nameplate is fixed on the frame (1a) and the Serial Number is fixed on the control box
(1b): easily readable.
2. Noise level sticker (fixed if available)
This sticker indicates the noise level in Lwa (sound power level).
3. WARNINGS AND PRECAUTIONS
This manual contains safety and service instructions to follow in order to prevent any accident. Some
of following stickers have been placed on the product for your SAFETY.
BEFORE USING THIS REFRIGERANT UNIT, read carefully all safety information
explained in this manual and indicated on the product. Be sure that everybody who
will use this refrigeration unit has been trained to use it in a safe way.
DURING THE USE OR MAINTENANCE OF THIS REFRIGERATION UNIT, the notes on safety are to
be considered.
Personal protective equipment :
Always use adequate Personal Protective Equipment before doing anything on this
refrigerant unit, as explained in this manual.
Working at height :
Take all necessary safety precautions when accessing this refrigeration unit : use
safe ladders, working platforms with appropriate guards.
Automatic start :
This refrigeration unit is equipped with Auto-Start/Stop, a valuable fuel saving
feature. When this refrigeration unit is set for Auto-start/Stop operation it may start
at any time and without warning.
Before servicing refrigeration unit, make sure the main power switch is on the OFF position. Ensure
the unit will not restart.
Lock-out / Tag-out can be performed by disconnecting and enclosing :
- The negative battery cable in diesel mode
- The electrical plug in electrical mode.
5
Page view 2
1 2 3 4 5 6 7 8 ... 23 24

Comments to this Manuals

No comments