4" O.D.
NOTES:
1. Thermostat is mounted on the right side only on on the wall.
2. Slave units are dimensionally the same, except without controls.
3. Non-changeover units do not have changeover valve.
4. A 4-in. minimum distance from the wall is required to obtain rated capacity.
An 8
1
/
2
in. minimum clearance is required for screen removal.
5. Condensate connection is mounted on the same side as the coil connection.
6. The unit is shipped with two Z brackets for mounting the unit and a hardware
kit including the following: 8 mounting screws, 8 tinnerman nuts, and 1 lint screen clip.
7. Shipping weight includes packaging.
SPECIFICATION
UNIT SIZE OPTIONAL FITTINGS
1234 CODE DESCRIPTION
Base Unit Dimension A (in.) 31 39 47 59 0 1/2” ODF Sweat Fitting
Drain Pan Dimension D (in.) 30 1/4 38 1/4 46 1/4 58 1/4 1 1/2” ODF Sweat Fitting with Vent
Coil Dimension E (in.) 24 1/8 32 40 52 2 1/2” ODM Flare Fitting
Hanger Dimension F (in.) 27 1/8 35 43 55 3 1/2” ODM Flare Fitting with Vent
Minimum Height from Floor (in.) 3333
Clearance from Discharge
Grille (sq in.)
81 108 135 175
Clearance from Recirculation
Grille (sq in.)
234 288 343 439
Shipping Weight (lb) 38 47 54 66
a36-518
Comments to this Manuals