
62-11175 COMFORTPRO SERVICE MANUAL
3-12
3.7 RECEPTACLE PANEL
SYMPTOM PROBABLE CAUSE SOLUTION REFERENCE
No 120 VAC power • High Heat Mode is selected • Switch to 'Low Heat' position • 1- 6, 1- 9
• APU not running • Start APU • 1- 6, 1- 9
• 35 Amp breaker tripped at • See "Generator" Section • 3-6
generator
Each symptom is followed by a probable cause and suggested solution. To isolate the
possible cause, proceed in a systematic manner to determine the faulty component. This
guide does not cover all possible situations that may occur under all conditions of operation.
WARNING
Disconnect the batteries from the
APU before performing any repairs.
Pc6000 do you know what model mine would be is there more than one model