Carrier 25HBA3 User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
FF1E
Base Series Fan Coil
Sizes 018 thru 036
Product Data
FEATURES
The FF1E Series Fan Coil unit is primarily designed for
apartment applications as upflow indoor air handlers for
split--system heat pumps and air conditioners for use with either
PuronR or R--22 refrigerant. They are available with factory-- or
field--installed electric heaters, both of which include the
disconnect. A field--installed cooling control with disconnect is
also available. A TDR (Time Delay Relay) is included with
either the electric heat or the cooling control packages. Both
models are available with a factory--installed TXV, Puron or
R--22 refrigerant.
This fan coil may be installed free--standing, wall hung or flush
mounted in the wall. The 22--in. wide cabinet size in all models
allows units to fit between standard stud spacings. No return--air
ductwork is required if the application provides for return air in
the front of the cabinet through either a louvered closet door or an
optional accessory decorative grille panel.
The cabinet exterior is made of pre--painted galvanized sheet
metal. The cabinet is fully insulated to meet applications in
conditioned space. Additional insulation is required if the unit is
installed in an unconditioned space. The unit is supplied with a
replaceable filter .
Multispeed, direct--drive, PSC blower motors have been selected
to provide the proper air handling for both heating and cooling.
Motors are suspended at three points on rubber grommets for
quieter operation.
All refrigerant lines, electrical power, and thermostat wiring enter
from the top of the cabinet. Sweat-- type refrigerant connections
on both liquid and suction lines make for swift, low--cost
installation. All service access to the unit is conveniently located
in the front.
All units come with a factory--supplied hard --shutoff thermostatic
expansion valve (TXV) metering device for performance
improvement.
The drain pan is constructed of high --impact, sound --deadening,
corrosion-- proof polyester resin. Primary and secondary drain
connections exit from the bottom or either side of the cabinet.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 69 70

Comments to this Manuals

No comments