Carrier 19XL Specifications download pdf (Page 20)

8. Disconnect the rabbet-fit connectors on the tube sheets (Figure 7, Item 7).

9. Rig vessels apart.

To Separate the Compressor from the Cooler

1. Unbolt suction elbow at the cooler flange (Figure 7, Item 11).

2. Disconnect the flared fitting on the refrigerant motor cooling line at the isolation valve

(Figure 6, Item 3).

3. Cut the refrigerant return line from the oil cooler (Figure 6, Item 2).

4. Disconnect the motor refrigerant return line (Figure 8, Item 1).

5. Disconnect the following (Figure 7):

a. Oil sump sensor cable (Item 5).

b. Bearing sensor cable (Item 4).

c. Motor sensor cable (Item 3).

d. Wires and cable housing which cross to the starter and control panel from the power

panel (Items 8 and 9).

e. Discharge sensor cable (Item 6).

f. Oil pressure transducer cable (Item 2).

g. Guide vane actuator cable (Item 10).

6. Disconnect the flared fittings for the oil reclaim lines (Figure 9, Item 1).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 79 80

No comments

Carrier 19XL Specifications Page 20