Carrier 50HQ User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
8
includes occupied comfort settings with lights on, unoccu-
pied energy savings with lights off.
Programmable 7-day flush-mount thermostat
offers the
same features as the 7-day programmable thermostat and
includes locking coverplate with tamper proof screws, flush
to wall mount, holiday/vacation programming, set point
limiting, dual point with adjustable deadband, O or B termi-
nal, and optional wall or duct-mounted remote sensor.
Programmable 5-day thermostat
offers 2-stage heat,
2-stage cool, auto changeover, 5-minute built-in compres-
sor protection, locking cover included, temperature display
in degrees F or C, keypad lockout, backlit display, 5-1-1
programming, O or B terminal, dual set point with adjust-
able deadband, configurable display, self-prompting pro-
gram, and 4 settings per day.
Non-programmable thermostat
offers 2 heat stages, 2 cool
stages, auto changeover, 5-minute built in compressor pro-
tection, locking cover included, temperature display in
degrees F or C, keypad lockout, large display, back-lit dis-
play, O or B terminal, dual set point with adjustable dead-
band, and backplate with terminals.
Aquazone™ system control panel (50RLP) includes a
pre-programmed, easy to use, Carrier Comfort Controller
set up for a WSHP system.
Coordinates, monitors, and controls all WSHP units
and ancillary equipment including cooling towers, boil-
ers, and system pumps.
50RLP model nomenclature is used to customize the
panel to control all WSHP system requirements.
Panel can be ordered with 2, 4, 6, or 8 stages of system
heat rejection.
Panel can be ordered with 2, 4, 6, or 8 stages of system
heat addition.
Panel can be ordered with unique WSHP zone opera-
tion capabilities for stand-alone systems (i.e., non-
communicating) to control 10 or 18 zones of WSHP
unit.
Panel can be ordered to control variable frequency cool-
ing tower fan operation.
System pumping operation can be configured for start/
stop, lead/lag, or variable frequency pump operation.
Direct digital control (DDC) compatible using the Car-
rier Comfort Network® (CCN) and WSHP units using
PremierLink™ CCN controllers.
Filter rack (2 in.) is available in place of the standard
1-in. return air filter to enhance the filtration system of the
water source heat pump. The 2-in. filter rack does not
include filters.
Fire-rated hoses are 2 ft long and have a fixed MPT on
one end and a swivel with an adapter on the other end.
Hose kits are provided with both a supply and return hose
and can be either stainless steel or galvanized. Five sizes
are available (
1
/
2
,
3
/
4
, 1, 1
1
/
4
, 1
1
/
2
in.).
Ball valves (brass body) are used for shutoff and
balancing water flow and are available with memory,
memory stop, and pressure temperature ports. Valves con-
sist of UL-listed brass body, ball and stem type with Teflon*
seats and seals. Five sizes are available (
1
/
2
,
3
/
4
, 1, 1
1
/
4
,
1
1
/
2
in.).
Y strainers (bronze body) are “Y” type strainers with a
brass cap. With a maximum operating pressure rating of
450 psig, the strainer screen is made of stainless steel.
Strainers are available with blow down valves. Five sizes
are available (
1
/
2
,
3
/
4
, 1, 1
1
/
4
, 1
1
/
2
in.).
Solenoid valves (brass body) offer 3.5 watt coil,
24 volt, 50/60 Hz, 740 amps inrush, and .312 amp hold-
ing. Valves operate slowly for quiet system application.
Five sizes are available (
1
/
2
,
3
/
4
, 1, 1
1
/
4
, 1
1
/
2
in.).
Hose kit assemblies provide all the necessary compo-
nents to hook up a water-side system. Supply hose
includes a ported ball valve with pressure temperature
(P/T) plug ports, flexible stainless steel hose with swivel
and nipple. Return hose includes a ball valve, preset auto-
matic balancing valve (gpm) with two P/T ports, flexible
stainless steel hose with a swivel and nipple, balancing
valve, and low-pressure drop water control valve.
Remote sensors are available for Aquazone flush mount
thermostats. Available sensors are for wall (wired and wire-
less) or duct mounted applications.
PremierLink™ accessories are available for providing a
fully integrated WSHP DDC system. Accessories include
supply air temperature sensors (with override and/or set-
point adjustment), communicating room sensors, CO
2
sen-
sors (for use in demand control ventilation), and linkage
thermostats (to control multiple units from one thermostat).
5
8
7
4
S
T
A
T
E
XP
N
E
DIT
S
E
T
S
C
H
D
.
9
6
3
2
0
_
1
C
L
E
AR
A
L
G
O
H
I
S
T
S
RVC
TE
S
T
A
L
R
M
E
N
T
E
R
Options and accessories (cont)
*Teflon is a trademark of E. I. du Pont de Nemours and Company.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

Comments to this Manuals

No comments