Carrier 33ZCVAVTRM Specifications download pdf (Page 170)

Occupancy Maintenance Screen — The Occupan-

cy Maintenance screen (OCCPC63S-64S) is used to check the

occupied schedule. Information concerning the current occu-

pied period is displayed. See Table 20. The information shown

in the occupancy maintenance screen only applies to the local

schedule in the controller. If the controller is a global schedule

broadcaster, then this information applies to any device follow-

ing this schedule. This information can only be viewed on the

occupancy maintenance screen of the broadcasting controller.

NOTE: Occupancy schedule OCCPC63 maintenance table

only applies to the H3_EX_RV output when configured for

type 6 Occupancy Schedule.

MODE — The Mode point displays the current occupied

mode for the controller. If the controller is following its own

local schedule or broadcasting a global schedule, this is the re-

sult of the schedule status.

Mode: Display Range 0 to 1

Default Value 0

Network Access None

CURRENT OCCUPIED PERIOD — If the controller is con-

figured to determine occupancy locally, the Current Occupied

Period point is used to display the current period determining

occupancy.

Current Occupied

Period: Display Range 1 to 8

Default Value 0

Network Access None

OVERRIDE IN PROGRESS — The Override in Progress

point is used to display if an occupancy override is in progress.

The point will display “Yes” if an override is in progress, or

“No” if there is no override.

Override In

Progress: Display Range Yes/No

Default Value No

Network Access None

OVERRIDE DURATION — The Override Duration point

displays the number of minutes remaining for an occupancy

override which is in effect. If the override duration value down-

loaded is in hours, the value will be converted to minutes. If the

occupancy schedule is occupied when override is initiated, the

current occupancy period will be extended by the number of

hours/minutes requested.

If the current occupancy period is unoccupied when the oc-

cupancy override is initiated, the mode will change to occupied

for the duration of the number of hours/minutes downloaded. If

the occupancy override is due to end after the start of the next

occupancy period, the mode will transition from occupancy

override to occupied without becoming unoccupied, and the

occupancy override timer will be reset.

Override

Duration: Display Units minutes

Display Range 0 to 240

Default Value 0

Network Access None

OCCUPIED START TIME — The Occupied Start Time

point shows the time that the current occupied mode began. If

the current mode is unoccupied, the value displayed by this

point will remain at default.

Occupied

Start Time: Display Range 00:00 to 24:00

Default Value 00:00

Network Access None

UNOCCUPIED START TIME — The Unoccupied Start

Time point shows the time that the current occupied mode will

end. This will also be the beginning of the next unoccupied

mode. If the current mode is unoccupied, the value displayed

by this point will remain at default.

Unoccupied

Start Time: Display Range 00:00 to 24:00

Default Value 00:00

Network Access None

NEXT OCCUPIED DAY — The Next Occupied Day point

displays the day of week when the next occupied period will

begin. This point is used with the Next Occupied Time so the

user will know when the next occupied period will occur.

Next Occupied

Day: Display Range MON, TUE, WED,

THU, FRI, SAT, SUN

Default Value No display (Blank)

Network Access None

NEXT OCCUPIED TIME — The Next Occupied Time point

displays the time day when the next occupied period will

begin. This point is used with the Next Occupied Day so the

user will know when the next occupied period will occur.

Next Occupied

Time: Display Range 00:00 to 24:00

Default Value 00:00

Network Access None

NEXT UNOCCUPIED DAY — The Next Unoccupied Day

point displays the day of week when the next unoccupied peri-

od will begin. This point is used with the Next Unoccupied

Time so the user will know when the next unoccupied period

will occur.

Next Unoccupied

Day: Display Range MON, TUE, WED,

THU, FRI, SAT, SUN

Default Value No display (Blank)

Network Access None

NEXT UNOCCUPIED TIME — The Next Unoccupied Time

point displays the time day when the next unoccupied period

will begin. This point is used with the Next Unoccupied Day

so the user will know when the next unoccupied period will

occur.

Next Unoccupied

Time: Display Range 00:00 to 24:00

Default Value 00:00

Network Access None

LAST UNOCCUPIED DAY — The Last Unoccupied Day

point displays the day of week when the controller last changed

from occupied to the Unoccupied mode. This point is used in

conjunction with the Last Unoccupied Time to know the last

time and day when the controller became unoccupied.

Last Unoccupied

Day: Display Range MON, TUE, WED,

THU, FRI, SAT, SUN

Default Value No display (Blank)

Network Access None

LAST UNOCCUPIED TIME — The Last Unoccupied Time

point displays the time of day when the controller last changed

from occupied to the Unoccupied mode. This point is read in

conjunction with the Last Unoccupied Day to know the last

time and day when the controller became unoccupied.

Last Unoccupied

Time Display Range 00:00 to 24:00

Default Value 00:00

Network Access None

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 315 316

Comments to this Manuals

No comments

Carrier 33ZCVAVTRM Specifications Page 170

Comments to this Manuals

Related products and manuals for Split-system air conditioners Carrier 33ZCVAVTRM