Carrier 33ZCVAVTRM Specifications Page 173

  • Download
  • Add to my manuals
  • Print
  • Page
    / 316
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 172
47
The Average Occupied Cool Set Point displays the Occu-
pied Cool set point from the 3V™ Linkage Coordinator.
Average Occupied
Cool Set Point: Display Units: degrees F (degrees C)
Display Range: 0.0 to 99.9
Default Value: 0.0
Network Access: None
The Average Unoccupied Heat Set Point displays the Unoc-
cupied heat set point from the 3V Linkage Coordinator.
Average Unoccupied
Heat Set Point: Display Units: degrees F (degrees C)
Display Range: 0.0 to 99.9
Default Value: 0.0
Network Access: None
The Average Unoccupied Cool Set Point displays the Unoc-
cupied cool set point from the 3V Linkage Coordinator.
Average Unoccupied
Cool Set Point: Display Units: degrees F (degrees C)
Display Range: 0.0 to 99.9
Default Value: 0.0
Network Access: None
The Average Zone Temperature displays the space tempera-
ture from the 3V Linkage Coordinator. This value will be the
same as the Average Occupied Zone Temperature if the 3V
system is in the occupied mode.
Average Zone
Temperature: Display Units: degrees F (degrees C)
Display Range: 0.0 to 99.9
Default Value: 0.0
Network Access: None
The Average Occupied Zone Temperature displays the
space temperature from the 3V Linkage Coordinator during oc-
cupied periods. This value will be 0 if the system is in unoccu-
pied mode.
Average Occupied
Zone Temperature:Display Units: degrees F (degrees C)
Display Range: 0.0 to 99.9
Default Value: 0.0
Network Access: None
The Occupancy Status point displays a 1 if occupancy is re-
ported by the 3V Linkage Coordinator. The Occupancy Status
point displays a 0 if occupancy is not reported by the 3V Link-
age Coordinator.
Occupancy
Status: Display Range: 0, 1
Default Value: 0
Network Access: None
Table 21 — Primary Maintenance Screen (MAINT)
NOTE: Bold values indicate points that can be forced through communications.
DESCRIPTION VALUE UNITS STATUS FORCE NAME
Thermostat Control No TSTAT
Occupied Yes OCCUP
Override Time Remaining 0 min OVRTIMER
Timed Override in Effect No TIMOV
Start Bias Time 0 min STRTBIAS
Heat No HEAT
Cool No COOL
IAQ Control No IAQCL
Demand Limit No DEMLT
Temp Compensated Start No TCSTR
IAQ Pre-Occupancy Purge No IQPRG
Unoccupied Free Cool No NTFCL
Fire Shutdown No FIRES
Linkage Control No DAVCL
Field/Startup Test No FIELD
Heat Submaster Ref 40.0 dF SHSR
Cool Submaster Ref 150.0 dF CCSR
Economizer Submaster Ref 120.0 dF ECONSR
Economizer Submastr Gain 0.00 ECONGN
Compressor Starts 0.00 CMPST
Compressor 1 Runtime 0.00 HOURS CM1RT
Compressor 2 Runtime 0.00 HOURS CM2RT
Supply Fan Runtime 17.00 HOURS FANRT
Reset Statistics No STAT_RES
AUXOUT Schedule Yes AUXSCHED
Linkage Thermostat
Linkage Status 2 LINKSTAT
Supervisory Element 0 SUPE-ADR
Supervisory Bus 0 SUPE-BUS
Supervisory Block 0 BLOCKNUM
Average Occ Heat Setpt 0.0 dF OCLOSTPT
Average Occ Cool Setpt 0.0 dF OCHISTPT
Average Unoc Heat Setpt 0.0 dF UNLOSTPT
Average Unoc Cool Setpt 0.0 dF UNHISTPT
Average Zone Temp 0.0 dF AZT
Average Occ Zone Temp 0.0 dF AOZT
Occupancy Status(1=occ) 1 OCCSTAT
Page view 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 315 316

Comments to this Manuals

No comments